Doosan Construction Equipment will display a DX140LCR-5 15 ton reduced tail swing crawler excavator in the Central Hall at the Las Vegas Convention Center during the annual World of Concrete Exhibition from 23-26 January 2018. The machine will be configured with a quick coupler and hydraulic breaker, as well as optional rubber track pads, which minimize damage to concrete surfaces. The DX140LCR-5 excavator offers a shorter tail swing, allowing operators greater flexibility where space is a premium without sacrificing performance. The Doosan DX140LCR-5 excavator is designed for long life with an extra-sturdy frame and reinforced superstructure. The machine comes standard with permanently sealed and lubricated track links, and the workgroup bushings and hard-wear disks are designed for reliability as well as extended service intervals to increase uptime. A standard 7-inch LCD screen allows operators to continue monitoring excavator parameters while viewing the rear view or optional side view camera image. Critical machine data appears next to the camera view. When the optional side camera is installed, a split screen allows both rear and side camera displays to be viewed at once. To help save valuable diesel fuel, auto shutdown is standard to help owners save fuel during non-working conditions. Operators can configure the idle time from 3 to 60 minutes. When enabled, the feature will shut down the excavator's engine when the preset idle time is met. This is particularly helpful in areas where local regulations require idling for only limited periods for off-highway machines.